- M.2 2280 NVMe SSD
- Capacity: 128GB MLC
- Dynamisches Thermal Throttling
- Low-Density Parity Check
- PCIe Gen3 x4
ATP M.2 2280 128GB PCIe SSD
excl. 19% VAT zzgl. Versandkosten
Formfactor:
- 2280-D3-M
Flash Type:
- MLC (Multi-Level Cell / 2-bit per Cell) NAND Flash
Capacity:
- 128GB MLC
Performance:
- Read: up to 1260MB/Sec.
- Write: up to 980MB/Sec.
Interface:
- PCIe Gen3 x4
Reliability:
- Dynamic Thermal throttling
- MTBF @25°C:>2.000.000 h
- LDPC (Low-Density Parity Check) & RAID Engine
- Data Retention @ 50°C: 5 Years (bei 10% Endurance)
Dimensions:
- 80.0 X 22.0 X 3.5 mm
Description
Industrial Grade M.2 NVMe SSDs
M.2 is formerly known as the next generation form factor (NGFF) SSD, a blueprint for internal expansion cards in computing systems. Successor of the mSATA standard that utilizes PCIe mini card connectors and layout. Ideal for industrial uses due to its high speed data transfer rates and long endurance in industrial and rugged environments.
The M.2 2280 NVMe SSD via PCIe Gen3x4 interface is specifically designed for niche applications for server / networking, data center, thin client and mission critical industrial alike applications.
By adopting NVMe 1.2 specifications and integrating 3D NAND MLC technology, ATP’s M.2 2280 NVMe SSD is constructed via a PCIe Gen 3×4 interface offering up to 1TB of memory capacity and boosted performance that exceed the previous bottleneck of AHCI standards, delivering Sequential Read 1,260 MB/s and Sequential Write 980 MB/s.
ATP’s Next Generation Form Factor ( NGFF ) SSD with NVMe protocol and PCIe interface, delivers up to 1 TB in memory capacity and unprecedented read / write speed up to 2x ~ 3x the SATA interface bandwidth; this setup maximizes the capability of high-speed PCI Express storage devices to perform multiple I/O (in/out) operations in parallel to fulfill the demanding responsiveness for all high-end enterprise storage systems.
SSD are not created equal, while the market strives for performance in NVMe SSDs, ATP takes a step further instead in carefully considering aspects of enhancing memory longevity and reliability for mission critical environments. This includes careful selection of BOM planning with key suppliers, and adding wide temperature and extreme power cycling testing.
Heat dissipation is one major issue commonly encountered for NVMe. Through temperature feedback and optimized thermal throttling mechanism, ATP’s NVMe may avoid drastic performance drop or possible damage to controller caused by overheating.
ATP’s NVMe based M.2 2280 SSD provides performance specifically tailored for an array of applications such as server/networking, data center, thin client, mission critical and industrial applications.
Additional information
Weight | 8 kg |
---|---|
Dimensions | 45 × 20 × 12 cm |
Produkte (Embedded Modules) | M.2 SSD |
Speicherart (Embedded Modules) | MLC |
Kapazität (Embedded Modules) | 128 GB |
Hersteller (Embedded Modules) | ATP |
Get your Quote

Callback

Accessories & Related products
-
ATP M.2 2280 512GB PCIe SSD
- M.2 2280 NVMe SSD
- Capacity: 512GB MLC
- Dynamisches Thermal Throttling
- Low-Density Parity Check
- PCIe Gen3 x4
-
ATP M.2 2280 1TB PCIe SSD
- M.2 2280 NVMe SSD
- Capacity: 1TB MLC
- Dynamisches Thermal Throttling
- Low-Density Parity Check
- PCIe Gen3 x4
-
ATP M.2 2280 256GB PCIe SSD
- M.2 2280 NVMe SSD
- Capacity: 256GB MLC
- Dynamisches Thermal Throttling
- Low-Density Parity Check
- PCIe Gen3 x4
Related products
-
ATP USB Nanodura 512MB
- Industrial-Grade-USB-Drives
- Capacity: 512MB SLC
- Fully encapsulated in Epoxy
- Temp.: -40°C ~ +85°C
- Protection: IP67
-
ATP CF 32GB
- Ruggedized Compact Flash card
- Cpacity: 32GB SLC
- Fully encapsulated in Epoxy
- Temp.: -40°C ~ +85°C
- Protection: IP67
-
ATP Velocity MV 256GB Industrial SSD
- SSD with MLC NAND Flash
- Capacity: 256GB
- Advanced Wear Leveling algorithm
- NSA Compliant SecureErase
- Supports S.M.A.R.T. ATA feature set
-
ATP USB Nanodura 4GB
- Industrial-Grade-USB-Drives
- Capacity: 4GB SLC
- Fully encapsulated in Epoxy
- Temp.: -40°C ~ +85°C
- Protection: IP67