- 15″ ATEX Display
- Resolution: 1024 x 768
- Brightness: 250 cd/m²
- Contrast: 700:1
- Touchscreen: Resistive
WM BT-R15 Display ATEX
excl. 19% VAT zzgl. Versandkosten
Display:
- Display: 38,1 cm (15″)
- Resolution: 1024 x 768
- Brightness: 600 cd/m²
- Contrast: 700:1
- Pixel Pitch: 0.297 x 0.297
- Active Display Area: 304.10 x 228.10
- Number of Colors: 16.2M (6bit+FRC)
- Viewing Angle: -80~80 (H); -60~80 (V)
Touchscreen:
- Resistive
Signal Connectors:
- 1x USB
- 1x RS232
- 1x VGA
Others:
- Power Source: 9~36V DC-in
- VESA mount 100 mm
- Dimension: 396 x 310 x 49 mm
- Cut-Out: 365 x 270 mm
Certificates& Approvals:
- Hazardous Locatoin: ATEX Zone 2, EX II 3G Ex ic nA IIC T4 Gc
UL Class I, Div.2, Goutps ABCD T4, ANSI7ISA12.12.01
CAN/CSA C22.2 No. 213-M1987 - Certifications: CE, FCC, CSA, UL60950-1
- Safety: UL60950-1, CSA C22.2 No. 60950-1-07, EN60950-1, IEC 60950-1
- Shock: MIL-STD-810G Method 516.6
- Transit Drop: MIL-STD-810G Method 516.6
- Vibration: MIL-STD-810G Method 514.6
Description
Industrial ATEX touch displays for explosive Environments
The industrial ATEX touch display WM BT-R15 offers a broad range of functions, and is particularly well suited for the use in ATEX Zone 2 and explosion hazard surroundings. The display withstands shocks, vibrations and falls without problems according the MIL-STD-810G standard. These traits of industrial aptitude enable the display to fulfill its duties long lasting and dependable. The ATEX display is therefore perfectly suited for military use or operations in rough conditions.
Waterproof and ATEX certified enclosure protection according IP65
The Full IP65 certification of the ATEX display offers all-round protection against environmental influences such as dust, water and dirt. This protection also encompasses the cable connections for external devices (these are not ATEX certified!). A resistive touchscreen provides for a good usability, optionally also with gloves or a pen. The 15” screen offers an aspect ratio of 4:3 with a resolution of 1024×768 pixels. Additionally, a viewing angle of 140 degrees vertically and 160 degrees horizontally, offers good readability from all points of view.
Easy mounting by standardized VESA holes
The display is equipped with a VGA port for the connection of external devices. An additional connection is possible via a RS232 port or optionally via USB port. The display powered with a voltage of 9-35 V DC. The measurements of the industrial display are 396 mm width, 310 mm height and 49 mm depth. The visible area measures 365 × 270 mm. A VESA 100/200 mm mount provides for the simple installation of the chassis at the location of operation.
Additional information
Weight | 8 kg |
---|---|
Dimensions | 45 × 20 × 12 cm |
Gehäuse Variante (Display) | Chassistype |
Touchscreen (Display) | Resistive Touch |
Display Größe (Display) | 15″ – 17″ |
Schutzart (display) | Full IP65/66, ATEX |