Skip to content
-
- PCIe x16 Cable Connector
- PCIe x16 Slot required
- Up to 128Gb/s at PCIe 3.0
- Requires no additional software
- Host-, Target-Mode supported
-
- Quad PCIe x8 Cable Connectors
- PCIe x16 Slot required
- up to 64Gb/s at PCIe 3.0
- Requires no additional software
- Host-, Target- and Dual Host Mode supported
-
- Dual PCIe x8 Cable Connector
- PCIe x16 Slot required
- up to 64Gb/s at PCIe 3.0
- Requires no additional software
- Host-, Target- and Dual Host Mode supported
-
- PCIe x4 Cable Connector
- PCIe x4 Slot required
- up to 20Gb/s at PCIe 2.0
- PCIe Switch onboard (NT Port and DMA Controller)
- Support PC to PC communication
-
- PCIe x16 Cable Connector
- PCIe x16 Slot required
- up to 80Gb/s at PCIe 2.0
- Requires no additional software
- Host-, Target-Mode supported
-
- 7 PCIe Slots
- 40 Gbps (PCIe x8 Gen 2)
- Supports x1, x4, x8, x16 PCIe
- Plug and Play Installation
-
- PCIe x8 Cable Connector
- PCIe x8 Slot required
- up to 40Gb/s at PCIe 2.0
- Requires no additional software
- Host-, Target-Mode supported
-
- PCIe x4 Cable Connector
- PCIe x4 Slot required
- up to 20Gb/s at PCIe 2.0
- Requires no additional software
- Host-, Target-Mode supported
-
- PCIe-Quad SFF-8644 Connectors
- Uses Mini-SAS HD or CMI Cables
- Bis zu 256Gb/s bei PCIe 4.0
- Requires no additional software
- Host-, Target-Mode supported
-
- PCIe x1 Cable Connector
- PCIe x1 Slot required
- up to 5Gb/s at PCIe 3.0
- Requires no additional software
- Host-, Target-Mode supported
-
- PCIe x1 to x16 add-in card support
- up to 64Gb/s at PCIe 3.0
- Requires no additional software
- Low Profile
- ATX power connector for input power
-
- One PCIe x4 & One PCIe x8 Connector
- PICMG 1.3 Socket required
- Switch puts out 20x PCIe Lanes to Backplane
- Requires no additional software
- Lane Active LEDs on slot cover
-
- PCIe x8 Optical Cable
- Four independent optical channels
- GEN 1 and GEN2 rates to 300m, GEN3 rates up to 100m
- Lightweight 3mm diameter fiber ribbon cable
- Supports PCIe auxiliary signaling
-
- PCIe x8 cable
- PCI-SIG PCI Express compliant
- 10 Gbps full-duplex trasnfer rate
- x8 PCIe Lanes and side-band Signals
-
- PCIe x4 Optical Cable
- Four independent optical channels
- GEN 1 and GEN2 rates to 300m, GEN3 rates up to 100m
- Lightweight 3mm diameter fiber ribbon cable
- Supports PCIe auxiliary signaling
-
- PCIe x4 to x8 Cable
- up to 2 meter length
- PCI-SIG PCIe Cable Specificatin compliant
- Standard iPass connector
- PCIe auxilary signaling
-
- Mini-SAS x4
- Up to 3 Meter Length
- SFF-8644-Connector
- CMI (Cable Management Interface)
-
- PCIe x16 Cable
- up to 7 meter length
- PCI-SIG PCIe Cable Specificatin compliant
- Positive latching mechanism
- Support 10 Gbps full duplex transfer rates